|
Kimi Raikkonen and Romain Grosjean
Launch Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
|
Presentation Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
|
|
Presentation Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
Presentation Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
|
Presentation Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
Presentation Lotus E20
F1 wallpaper 2012 (HI RES PHOTO 1920x1280)
|
Lotus E20 Technical Specifications:
Chassis Moulded carbon fibre and aluminium honeycomb composite monocoque, manufactured by Lotus F1 Team and designed for maximum strength with minimum weight. RS27-2012 V8 engine installed as a fully-stressed member.
Front Suspension
Carbon fibre top and bottom wishbones operate an inboard rocker via a pushrod system. This is connected to a torsion bar and damper units which are mounted inside the front of the monocoque. Aluminium uprights and OZ machined magnesium wheels.
Rear suspension
Carbon fibre top and bottom wishbones with pull rod operated torsion springs and transverse-mounted damper units mounted in the top of the gearbox casing. Aluminium uprights and OZ machined magnesium wheels.
Transmission
Seven-speed semi-automatic titanium gearbox with reverse gear. “Quickshift” system in operation to maximise speed of gearshifts.
Fuel system
Kevlar-reinforced rubber fuel cell by ATL.
Cooling system
Separate oil and water radiators located in the car’s sidepods and cooled using airflow from the car’s forward motion.
Electrical
MES-Microsoft Standard Electronic Control Unit. braKiNg system
Carbon discs and pads. Calipers by AP Racing. Master cylinders by AP racing and Brembo.
Cockpit
Removable driver’s seat made of anatomically formed carbon composite, with six-point or eight-point harness seat belt by OMP Racing. Steering wheel integrates gear change, clutch paddles, and rear wing adjuster.
KERS
Motor generator unit driving into front of engine with batteries as an energy store. Motor Generator supplied by Renault Sport F1. Electronic control unit by Magneti-Marelli.
Dimensions
Front track: 1450 mm
Rear track: 1400 mm
Overall Length: 5038 mm
Overall height: 950 mm
Overall width: 1800 mm
Overall weight: 640 kg, with driver, cameras and ballast
RS27 Engine
Configuration: 2.4l v8
No of cylinders: 8
No of valves: 32
Displacement: 2400 cc
Weight: 95kg
V angle: 90°
Rpm: 18,000
Fuel: TOTAL
Oil: TOTAL
Power output: 750 bhp
Spark plugs: semi surface discharge
Ignition system: high energy inductive
Pistons: aluminium alloy
Engine block: aluminium alloy
Crankshaft: Nitrided alloy steel with tungsten alloy counterweights
Connecting rods: titanium alloy
Throttle system: 8 butterflies
Comments:
